Table of Contents
Advertisement
Novell NetWare 3.x Client Setup for Windows 95 or 98
The instructions below explain how to set up the regular Novell NetWare 3.x
client for use on a Windows 98 or 95 PC. If you are installing NetWare's
Client32 software instead, follow the instructions in that chapter .
1. Follow the Windows 95 setup instructions or the Windows 98 setup instruc-
tions.
2. Start up Windows 95 or 98. Click on Start, Settings, then Control Panel.
Double-click on Network. The Network window appears. Click on the
Configuration tab.
3. In the Primary Logon Box, choose Client for NetWare Networks.
4. Under the The following network components are installed box, highlight
Client for NetWare Networks and click on the Properties button.
5. The Client for NetWare Networks Properties window appears. Under the
General tab, enter the name of your network's Preferred Server. Assign the
First Network Drive Letter; the default is F. Make sure the Enable logon
script processing is checked.
6. Click OK. Click on the Access Control tab. Make sure the Share-level
access control option is selected; do not select User-level access control.
7. When you're done, click OK to restart your computer.
The NetWare portion of your Windows setup is complete.
57
Linksys Instant EtherFast
Series
®
EtherFast
10/100 LAN Cards
®
Windows 95, 98 or ME Client for Windows NT
If you are installing the EtherFast
Millennium PC that you plan on logging into a NT domain server, follow the
directions below.
1. Start up Windows. Click on Start, Settings, then Control Panel. Double-
click on Network. The Network window appears. Click on the
Configuration tab.
2. Select Client for Microsoft Networks in the Installed Components box and
click the Properties button. Verify that Log on to Windows NT domain is
selected in the Logon Validation box. For the Windows NT domain, enter
DOMAIN. Under Network logon options, select Logon and restore net-
work connection.
®
10/100 Card in a Windows 95, 98 or
58
Advertisement
Table of Contents
