Installing The Driver - Linksys PCMLM56 User Manual

Windows 98

Installing The Driver

To install the network driver for the card, Start up your
computer and Windows 98.
1. Windows 98 will automatically detect the presence of
the EtherFast 10/100 + 56K Modem PC Card in your
computer.
If Windows 98 goes directly to the windows desktop
and does not display the New Hardware Found window,
refer to problem 1 of the Troubleshooting section of this
guide.
2. While the Update Device Driver Wizard window is
visible, put the EtherFast 10/100 + 56K Modem PC
Card program disk 1 into drive A and click on Next.
A window will appear and ask you What would you like
Windows to do?
3. Select Search for the best driver for your device
(Recommended). Click on Next.
4. A window will appear asking where you would like
Windows 98 to search for the driver. Make sure that
Floppy disk drives is selected and/or that A:\ is speci-
fied in the location window, and click Next to continue.
16