Renault TRAFIC 2022 User Manual page 223

CRUISE CONTROL
3
2
Adjusting the cruising speed
The cruising speed may be changed by
pressing the following repeatedly:
– the 2 switch (SET/-) to reduce the
speed;
– the 3 switch (RES/+) to increase the
speed.
Note: press and hold one of the
switches to modify speed by succes-
sive increments.
(3/5)
Exceeding the cruising speed
The cruising speed may be exceeded
at any time by depressing the accelera-
tor pedal.
While it is being exceeded, the cruising
speed flashes in red on the instrument
panel. Then, release the accelerator
pedal: after a few seconds, the vehicle
will automatically return to its set cruis-
ing speed.
1
You must keep your feet
near the pedals to be
ready to react in an emer-
gency.
If the cruise control is no
longer available (after sev-
eral attempts to activate
it), contact an Approved
Dealer.
Temporarily not available
The system controls accelera-
tion and deceleration of your vehi-
cle using the engine and braking
system. The system activates the
brakes in order to maintain the set
speed, the system applies limited
braking. In the event of a steep de-
scent, for example in a mountainous
area, you must select a lower gear
to benefit from engine braking.
To reduce the load imposed on the
braking system and to prevent the
brakes from overheating, the cruise
control function may be temporar-
ily interrupted and the message
"Check Cruise Control" may appear.
The message disappears when the
function becomes available again.
If the message remains, contact an
approved dealer.
2.69