Cisco Nexus 7018 Manual page 25

Installing a Cisco Nexus 7018 Chassis
Figure 14: Attaching the Right Door Stopper
1 Right door stopper identified with an R on the bottom of the base.
2 Two M3x10 screws that fasten the stopper to the right side of the
cable management frame.
Step 3 Position the hinge bracket (700-28491-01) at the bottom of the cable management frame and the chassis as shown in
Figure 15: Positioning the Hinge Bracket to the Cable Management Frame and Chassis, on page
Installing the Front Door and Air Intake Frame
3 Screw holes on the right side of the cable
management frame.
26.
Installing a Cisco Nexus 7018 Chassis
25