Safety - ProMinent CONCEPT PLUS Series Operating Instructions Manual

2
Correct use of • The pump may be used only for metering liquid media!
equipment • All other uses or modifications are prohibited!
• The pump is not suitable for metering gaseous media or solids!
• The pump is not designed for use in Ex areas!
• The pump may only be used in compliance with the technical data
• Please observe the resistance of the materials of all assemblies in
• You are obliged to observe the information in the operating
• The pump must be operated by appropriately trained and authorised
WARNING
• The pump may start to operate as soon as it connected to the
• The pump cannot be switched off!
• Disconnect the power cable from the mains before working on
• Risk of electric shock - This pump is supplied with a grounding
ProMinent ®

Safety

and specifications stated in the operating instructions!
contact with the media (see ProMinent resistance list in the product
catalogue or under www.prominent.com)!
instructions on the various life phases of the system (such as
assembly, installation, ...)!
personnel!
The personnel must be familiar with metering pumps and their
operation!
mains power supply!
Ensure that no hazardous metering chemical can leak out!
If you have not done so, set the multifunction switch to STOP or
disconnect the pump from the mains immediately.
In the case of an electrical failure, disconnect the mains cable
from the power supply.
the pump.
conductor and grounding-type attachment plug. To reduce the risk
of electric shock, be certain that it is connected only to a properly
grounding-type receptacle.
Safety
21