Intended Use - Siemens WTT568 Series Operating And Installation Instructions

Safety instructions | EN
The device is used for transmitting the consumption data of compatible measuring devices. The device may only be
used for this purpose.
An application other than previously described or a modification of the device are considered as non-intended use.
This device may only be used in building services installations and only for the application described. This device
has been designed in accordance with the guidelines for protection class III (WTT568..) or protection class II
(WTX568..) and must be installed in accordance with these regulations. The local regulations must be observed
(e.g. installation).
19.04.2022 96