Agri-Fab 26" Leaf/Lawnsweeper 45-02181 Owner's Manual page 4

3. Now tighten the four bolts from step 1.
4. Assemble a bag rod clip to the inside of each lower
handle tube using a curved head bolt secured down
against the clip using a 1/4" lock nut. The open end of
the clips should face towards the sweeper housing. See
figure 3.
FIGuRE 3
5. Slide the long bag rod (28-1/2" long) through the stiched
bag flap on the top of the hopper bag as shown in figure
4.
6. Slide the short bag rod (25-1/2" long) through the stiched
bag flap on the bottom of the hopper bag as shown in
figure 4.
FIGuRE 4
7. Assemble the two plastic rod caps to the rod ends of
the bottom bag rod. Assemble two Palnuts to the ends
of the top bag rod. See figure 5.
FIGuRE 5
8. Assemble the two plastic caps 3/4" x 7/8" onto the ends
of the leg stands as shown in figure 6.
FIGuRE 6
4