YOODA SVERO Series Instructions

www.sukcesgroup.pl
In order to fully explore available functions of SVERO series please take a moment and read this manual before using the device.
SVERO transmitters are compatible with all YOODA brand devices.

1. General information

30-channel SVERO remomte control (SVERO_15x2R)
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.

2. Detailed description

SUBCHANNEL 1:
UP button
STOP button
DOWN button
2-channel transmitter
(front)
1. Estimated battery lifespan is 3 year if the device runs 4 commends a day in average.
2. Batteries should be changed when LED diode stops flashing or receiving device stops reacting to commands.
3. To replace the batteries and get access the programming buttons, remove the back of the case.
4. When replacing the battery, pay attention to the correct polarity
Batteries contain substances that may be hazardous to health and may pollute the environment. Used batteries should
be disposed of properly.
SVERO_1x2R
SUBCHANNEL 2: SUBCHANNEL 1:
UP button UP button
STOP button STOP button
DOWN button
DOWN button
CHANNEL - button
30-channel transmitter
| SVERO_15x2R
1. Control:
can control single motor, or a group
of up to 20 motors on each channel
2. Range:
200 meters outdoor,
35 meters indoor
3. Battery:
2 x CR2430
4. Power supply:
3 V
5. Dimensions:
110 x 48 x 12 mm
6. Transmitting power:
10 mW
7. Operating temperature:
from 0°C to 50°C
8. Protection degree:
IP 30
P2 programming button
for subchannel 2
SUBCHANNEL 2:
UP button
STOP button
DOWN button
CHANNEL + button
(front)
1
P2 programming button
for subchannel 1
batteries
2-channel or 30-channel transmitter
(back)