Advertisement
Quick Links
www.sukcesgroup.pl
In order to fully explore available functions of VETRO series please take a moment and read this manual before using the device.
VETRO transmitters are compatible with all YOODA brand devices.
1. General information
15-channel VETRO remote control with display
and timer, white (VETRO_15RT)
Radio receiver range is a variable value and can differ from declared values depending on conditions in which device
operates. Possible sources of changes in range are building construction, interference caused by other radio transmitters
etc.
2. Detailed description
5-channel transmitter
with timer
(front)
VETRO_5RT | VETRO_15RT
LCD display
CHANNEL - button
CHANNEL + button
UP button
STOP button
DOWN button
TIME CHANGE
button
WORK MODE
button
BLOCK TRANSMITTER
button
15-channel transmitter
1. Control:
can control single motor, or a group
of up to 20 motors on each channel
2. Range:
200 meters outdoor,
35 meters indoor
3. Battery:
1 x CR2032
4. Power supply:
3 V
5. Dimensions:
136 x 46 x 15 mm
6. Transmitting power:
10 mW
7. Operating temperature:
from 0°C to 50°C
8. Protection degree:
IP 30
LCD display
UP button
STOP button
DOWN button
programming button
with timer
(front)
1
P2
Battery
5 -channel or 15-channel transmitter
with timer
(back)
Advertisement
Related Manuals for YOODA VETRO 5RT
Summary of Contents for YOODA VETRO 5RT
- Page 1 VETRO_5RT | VETRO_15RT www.sukcesgroup.pl In order to fully explore available functions of VETRO series please take a moment and read this manual before using the device. VETRO transmitters are compatible with all YOODA brand devices. 1. General information 1. Control:...
- Page 2 1. When all channel numbers (5RT remote control) or 1 --- 15 (15RT) are shown on the display, the group channel is on. It allows simultaneous control of all roller shutters that are programmed for individual blinds channels. No programming functions can be performed on group channel.
- Page 3 The current time has been set. By pressing Use the UP or Press and hold TIME CHANGE button go to DOWN buttons to TIME button for about 3 seconds day of weeks settings. set the days of to confirm the changes. week.
- Page 4 7. Checking and activating automatic opening and closing times Use the MODE button Press MODE button. Pressing Pressing the LOCK button To exit the mode to set the automatic the button again, displays the activates or deactivates press STOP button. or random mode.
Need help?
Do you have a question about the VETRO 5RT and is the answer not in the manual?
Questions and answers