Linksys CIT300 User Manual page 78

Dual-Mode Internet Telephony Kit
Registering a Handset with an Additional USB Base Station
When the handset is registered with more than one USB base station, you can select which USB base station you
want the handset to use.
1. Select MENU.
2. Select SYSTEM.
3. Select OK.
4. Select REGISTER.
5. Select OK.
6. Press and hold down the page button on the additional USB base station for four seconds.
7. On the handset, enter the PIN code. The default is 0000.
8. Select OK.
Selecting a USB Base Station
When you want to select a USB base station to use, you have two methods available. Follow one of the following:
1. Press and hold down MENU for one second.
2. You will see the BASE SELECT screen.
3. Use the navigation pad to select the USB base station you want to use. Then select OK.
68
Chapter 4: Using the Dual-Mode Internet Telephony Kit
Managing the Handsets