General Safety; Protection Devices Installed On The Appliance - Electrolux SafeBox Hold Installation And Operating Manual

Stage Protective
garments
Extraordinary
cleaning
Maintenance
Dismantling
Scrapping
Key:
●
PPE REQUIRED
○
PPE AVAILABLE OR TO BE USED IF NECESSARY
—
PPE NOT REQUIRED
1. During these operations, gloves must be cut-resistant. Failure to use the personal protection equipment by operators, specialized personnel or users can
involve exposure to damage to health (depending on the model).
2. During these operations, gloves must be suitable for contact with chemical substances used (refer to the safety data sheet of the substances used for
information regarding the required PPE). Failure to use the personal protection equipment by operators, specialized personnel or users can involve exposure to
chemical risk and cause possible damage to health (depending on the model).
A.3

General safety

• The appliances are provided with electric and/or mechanical safety devices for protecting workers and the appliance itself.
• Never operate the appliance, removing, modifying or tampering with the guards, protection or safety devices.
• Do not make any modifications to the parts supplied with the appliance.
• Several illustrations in the manual show the appliance, or parts of it, without guards or with guards removed. This is purely for
explanatory purposes. Do not use the appliance without the guards or with the protection devices deactivated.
• Do not remove, tamper with or make illegible the CE marking, the safety, danger and instruction signs and labels on the
appliance.
• The A-weighted emission sound pressure level does not exceed 70 dB(A).
• If the glass doors show signs of damage, immediately make the appliance inoperative.
• Do not use products (even if diluted) containing chlorine (sodium hypochlorite, hydrochloric or muriatic acid, etc.) to clean the
appliance or the floor under it.
• Carefully avoid exposure of the equipment to ozone - do not use ozonizers in the rooms where the equipment is installed.
• Do not spray aerosols in the vicinity of this appliance while it is in operation.
• Install the appliance under conditions of adequate ventilation in order to provide a suitable air change per hour. Make sure that
the ventilation system, whatever it is, always remains operational and efficient for the entire period of time during which the
equipment is operating.
• The following operations have to be carried out by specialised authorised personnel or Customer Care Service provided with all
the appropriate personal protection equipment (A.2 Personal protection equipment), tools, utensils and ancillary means, who can
ask the manufacturer to supply a servicing manual:
– Installation and assembly
– Positioning
– Electrical connection
– Appliance cleaning, repair and extraordinary maintenance
– Appliance disposal
– Work on electrical equipment
A.4

Protection devices installed on the appliance

Guards
The appliance has:
• fixed guards (e.g. casings, covers, side panels, etc.), fixed to the appliance and/or frame with screws or quick-release connectors
that can only be removed or opened with tools; therefore the user must not remove or tamper with such devices. The
Manufacturer declines any liability for damage due to tampering or their non-use;
• interlocked movable guards (door) for access inside the appliance;
• appliance electrical equipment access panels or doors, made from hinged panels openable with tools. The panel or the door
must not be opened when the appliance is connected to the power supply.
Safety footwear
○ ●
○ ●
○ ●
○ ●
ON
OFF
Gloves Glasses
●
1 2
ˉ
○
○
○
Disconnect the appliance from the power supply before
carrying out any installation, assembly, cleaning or
maintenance procedure.
Safety helmet
○
—
— —
○
—
○
—
5