Sliding Doors Installation; Electrical Connection - Electrolux SafeBox Hold Installation And Operating Manual

Adjust the appliance by turning the special adjustable feet and
making sure it is perfectly levelled horizontally (side to side and
front to rear).
CAUTION
• Keep the side electrical box and ven-
tilation openings in the appliance
casing free of obstructions.
• Never cover the fan air conveyor, even
temporarily, as this can compromise
appliance proper operation.
E.5

Sliding doors installation

IMPORTANT
In the case of models with sliding doors, the doors
have a specific direction (left and right) and are not
interchangeable.
1. Right door, with two extra rubber bumpers
2. Left door
Make sure to install the doors in the correct order by paying
attention to their positioning in the guides.
1. Place the right door in the most internal rail.
2. Place the left door in the most external rail.
3. Visually check that the doors are properly mounted.
E.6

Electrical connection

WARNING
Refer to paragraph A.11 Electri-
cal connection in the chapter A
Warning and safety information.
The appliance can be supplied with or without a plug. In case
of cable without plug, connect the terminals to the power
supply.
13