Grandview CNV Series Instruction Manual

Motorized screen with ir remote control

Instruction Manual for

CNV series Motorized Screen with IR Remote Control

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel: 1-604-412-9777

Fax: 1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

No.43,Guomao Road South, Hualong Town,

Panyu District, Guangzhou City, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

www.grandviewscreen.com.cn

Table of Contents

Need help?

Do you have a question about the CNV Series and is the answer not in the manual?

Page 1 Instruction Manual for CNV series Motorized Screen with IR Remote Control Grandview Crystal Screen Canada Ltd. #11- 3751 North Fraser Way, Marine Way Business Centre, Burnaby, BC, Canada V5J 5G4 Tel: 1-604-412-9777 Fax: 1-604-412-9796 Website: www.grandviewscreen.ca Guangzhou Grandview Crystal Screen Co., Ltd.
Page 2 Attention: > Please make sure there is no dust or dirt on the fabric surface before rolling it back to the casing > The recommened working time is less than 50 seconds. The motor will enter overheating protection status and stop working for every continuous 4 minuters operation, user would need to wait for a while until the motor cool down before operating again.
Page 3 Instructions Button Function and Operation Instruction : 1.Press UP button to lift the screen 2.Press STOP button to stop the screen 3.Press DOWN button to lower the screen 4.Press MICRO-UP button to retract the screen in small STOP DOWN increments(150ms for each movement) 5.Press MICRO-DOWN button to lower the screen in small Micro-up Micro-down...

Cn-mr series