Grandview CR-Mxx User Manual

Crystal motorized screen

Download this manual

Enlarged version

GRANDVIEW REPRODUCING GENUINE COLORS

Grandview Crystal Screen Canada Ltd.

#11- 3751 North Fraser Way,

Marine Way Business Centre,

Burnaby, BC, Canada V5J 5G4

Tel:1-604-412-9777

Fax:1-604-412-9796

Website: www.grandviewscreen.ca

Guangzhou Grandview Crystal Screen Co., Ltd.

P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road,

Shiqiao, Panyu District, Guangzhou, Guangdong, China

Tel: +8620-8489-9499 Fax: +8620-8480-3343

Website: www.grandviewscreen.com

GRANDVIEW REPRODUCING GENUINE COLORS

Model CR-Mxx

Before use, please read instructions carefully. After installation, store instructions for future reference.

ISO9001:2000

International Certification

Crystal Motorized Screen User s M anual

Thank you for purchasing a Grandview projection screen.

Need help?

Do you have a question about the CR-Mxx and is the answer not in the manual?

Page 1 Fax:1-604-412-9796 Website: www.grandviewscreen.ca Guangzhou Grandview Crystal Screen Co., Ltd. Thank you for purchasing a Grandview projection screen. P.O. 511400 Federal Ind. Zone No. 363, Yushan West Road, Before use, please read instructions carefully. After installation, store instructions for future reference.
Page 2 Description Metal Casing End Cap Screen Fabric Accessories 5mm Allen Key (1pc ) Installation Manual ( 1pc ) Optional Mounting bracket A ( 1pc ) 5 x 60mm Anchor and bolts ( 6pcs ) 5 x 60mm Screw ( 6pcs ) 5mm Extended washer ( 6pcs ) 5 x 30mm Screw ( 6pcs ) Mounting bracket B ( 1pc )
Page 3 Warnings Installation The warranty will only be valid if you follow the instructions below carefully! Improper use and care may cause This projection screen should be installed at the best possible viewing position for the audience. Take serious injury and/or damage!. out all the parts from the packaging and follow the accessories guideline to ensure you have all the Make sure the Fixing screw be fastened when using the wall bracket, to avoid any damage.
Page 4 According to the measurement, use the drill to drill identical holes of the appropriate size on the ceiling Grandview projection screens are controlled by a manual switch or an remote control. (use a smaller drill bit than the actual screws) and ensure that it is level (f igure 2 & 3). Screw in the hook 1.Manual switch...