Technical Data
Auxiliary switches
Fail safe - Enerdrive
Power consumption
Torque
Power supply
Running time through 90º
Feedback
Electrical connection
Inlet bushing
Control signal
Angle of rotation
Direction of rotation
Operating temperature
Storage temperature
Relative Humidity
Weight
Warning: Do not press the clutch when actuator is powered
Dimensions
Caution
We strongly recommend that all Neptronic
prevent interference with, and/or possible damage to incompatible equipment.
When multiple actuators are wired on a single transformer, polarity must be observed. Long wiring runs create voltage drop which may affect the actuator performance.
1
Enerdrive System U.S.A. Patent #5,278,454
TMN-RMN_210804
Features:
•
Clutch for manual adjustments.
•
Maintenance free.
•
Position indicator.
•
Control signal fully programmable.
•
Brushless DC driven motor.
•
Fail safe by Enerdrive System
(on models 060 & 080).
•
Auxiliary switches
(on models 020 & 080).
TM000N
TM020N
TM060N
No
Yes(2)
No
15 VA
180 in.lb. [20 Nm] at rated voltage
Analog, Digital or PWM programmable (factory set with analog control signal)
0 to 90 degrees, electronically adjustable (factory set with 90º stroke)
Reversible, Clockwise (CW) or Counterclockwise (CCW) (factory set with CW direction)
6 lbs. [2.7 kg]
®
products be wired to a separate transformer and that transformer shall service only Neptronic
Specification & Installation Instructions
TM080N
RM000N
No
Yes (2)
Yes
40 VA Peak, 15 VA
22 to 26 Vac or 28 to 32 Vdc
40 to 50 sec torque dependant
4 to 20 mA or 2 to 10 Vdc adjustable
2
18 AWG [0.8 mm
] minimum
2 inlet bushing of 7/8 in [22.2 mm]
0ºF to 122ºF [-18º C to 50ºC]
-22ºF to 122ºF [-30º C to 50ºC]
5 to 95 % non condensing.
Dimension
A
B
C
D
Actuators
1
RM020N
RM060N
No
Yes (2)
No
No
24 VA
40 VA Peak, 24 VA
360 in.lb. [40 Nm] at rated voltage
8.5 lbs. [3.8 kg]
Imperial (in)
Metric (mm)
5.20
1.33
9.13
3.55
®
products. This precaution will
TM000N
TM020N
TM060N
TM080N
RM000N
RM020N
RM060N
RM080N
RM080N
Yes (2)
Yes
132.1
33.8
231.9
90.2
1