The Effect Chain - Korg STAGE VINTAGE SV2S-88 User Manual

74| The Editor

The effect chain

The EQ and pedal ("stompbox") effect are placed before the amp model and
cabinet, and the modulation and ambient (reverb/echo/delay) are placed af­
ter the cabinet model. Finally, a limiter takes care of dynamics.
Modulation, delay, echo and reverb effects are placed after the amp module,
since they are effects that are usually added after capturing the signal from
the cabinet with the microphones.
SIGNAL ROUTING
SOUND
VOLUME
MODULATION
The effect chain cannot be modified. However, each section can be individ­
ually turned on or off. Use the On button next to each effect to turn the
corresponding section on or off.
All the effects are applied to the sound as a whole, including all the programs
whose FX Bypass switch is set to off in the Sound page.
PRE AMP POWER AMP
VOLUME
EQ
CABINET
POWER
VALVE
ATT.
AMBIENT
PRE FX
NR
PROGR
LVL
TOTAL FX
OUTPUTS
Stereo Limiter
Stereo Mastering Limiter