Korg STAGE VINTAGE SV2S-88 User Manual page 37

or AB) and negative­feedback circuit (or lack thereof) are also carefully sim­
ulated.
2 You can change the preamp's volume (therefore, its overdrive saturation)
by using the DRIVE knob. To return to the original setting, press the DRIVE
knob.
NOTE: Extreme DRIVE settings may cause unwanted distortion. If this happens, low­
er its setting.
AMPLIFIER type
Clean
Twin
Tweed
AC30
Boutique
Organ
Modulation
In the MODULATION section you can select a modulation effect. This selects
one of six modulation effect models. Effects are placed after the amp and
cabinet model.
1 Use the TYPE knob of the MODULATION section to select a different modu­
lating effect (chorus, phaser, flanger or rotary speaker).
2 You can change the speed of the modulation (or horn rotation) by using the
SPEED knob, and the intensity (or horn acceleration) by using the INTENSITY
knob. To return to the original settings, press the SPEED or INTENSITY knob.
3 If the rotary effect is selected, use the Slow/Fast button to change the ro­
tor's speed.
Using the effects |29
DRIVE knob
PreVol
PreVol
PreVol
PreVol
PreVol
Drive