Ambient Effects section
Here you can adjust the settings of a reverb, echo or delay effect inserted
after the modulation.
Choosing an Ambient effect
Click the name of the selected Ambient model, then choose a different item
from the list.
Room
This models the reverberation of a typical room, with numerous early reflec
tions.
Parameters
Values
Time
0...99
Lo Damp
0...100
Hi Damp
0...100
Pre Delay
0...70
Mix
0...100
Notes
Sets the reverb time.
Adjusts the attenuation of the lowfrequency range.
Adjusts the attenuation of the highfrequency range.
Sets the initial delay before the reverberation begins. By
adjusting this setting you can clarify the definition of the
original sound.
Adjusts the mix between the direct signal and the effect.
FX page |95