Linkskey ioPower Specifications

Remote power switch

Hide thumbs Also See for ioPower:

See also: User Manual

Uniclass Product Specification

ioPower

Uniclass's Remote Power Switch Solution

Remote Power Control Solution for Any Ac-powered devices, computers and servers

ioPower

Cascadable Unit

for Remote Power Control [

]

ioPower can be used in standalone/Cascaded configuration

The ioPower provides 8 AC power outlets and can be deployed alone with a host PC for remote

power control of any AC-powered devices. The ioPower proves to be a reliable and convenient

remote power control solution that offers cost-effective power control solution to enterprise-level

customers.

To control your AC-powered devices, you only need to tap them to any of ioPower's 8 power output

outlets and then connect the ioPower to a host PC installed with the Power Management software.

To power on/off the connected AC-powered devices, you only need to press the front-panel button

(press and hold for 5 seconds); or you can use the power management software. The software is

installed on a host PC and provides a virtual front-panel that allows user to click to power on/off any

connected devices. It also provides timer function to preset the destined power on/off time or

power-up duration for each of your devices.

ioPower connected to a host PC

The ioPower is also capable of cascading with multiple downstream units into a daisy-chain

configuration to maximize the port capacity up to one hundred more. Thus you can easily control up

to hundred of AC-powered devices and/or servers.

Table of Contents

Need help?

Do you have a question about the ioPower and is the answer not in the manual?

Page 1 The ioPower provides 8 AC power outlets and can be deployed alone with a host PC for remote power control of any AC-powered devices. The ioPower proves to be a reliable and convenient remote power control solution that offers cost-effective power control solution to enterprise-level customers.
Page 2 Uniclass Product Specification ioPower ioPower as Kripman Accessory for Remote Power Control When your servers or network devices just locked up and stopped responding, it can only be salvaged by cycling power off and on for a reboot. As simple as this reboot procedure can be, it nevertheless requires the admin to attend the server room just to switch the power off and on again.
Page 3: Specifications
▪ Allows full control of 8 AC power outlets using ASCII commands over a serial interface ▪ Cascadable up to 16 units [16 x ioPower] and control up to 128 AC power outlets, using UTP cables over RJ-45 interfaces ▪...