Adjustment Instructions - Whalen Axon Task WC-13AX-GO Instruction Booklet

1. To Adjust Seat Height:
While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and
raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle
while applying more weight downward on the seat. The chair will descend until the handle is released or the
chair reaches the bottom position.
2. To Operate Tilt Lockout:
While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all
the way out (away from the gas lift) to allow the chair to tilt backwards. To lock the chair in the upright or
vertical position, sit upright and push the handle in towards the gas lift.
3. To Adjust Tension on The Tilt:
Reach under the front center of the chair, grasp the round knob and turn it counter-clockwise to stiffen the
tilt mechanism. Turn the knob clockwise to loosen the tilt mechanism. Turn the knob until the desired
resistance is reached.

ADJUSTMENT INSTRUCTIONS

6