Advertisement
Quick Links
Shelby 60in Fireplace Console
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Model # WSF60SY26C
ADULT ASSEMBLY REQUIRED
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
www.whalenfurniture.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2020-06-05
# WSF60SY26M
1-866-942-5362
Rev. 0001-B
LOT NUMBER:
DATE PURCHASED: /
/
Advertisement
Related Manuals for Whalen Shelby 60in
Summary of Contents for Whalen Shelby 60in
- Page 1 LOT NUMBER: DATE PURCHASED: / Shelby 60in Fireplace Console Model # WSF60SY26C # WSF60SY26M ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your...
-
Page 2: Quality Guarantee
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. - Page 3 IMPORTANT Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH THE DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH A DAMP CLOTH.
- Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. B- Fixed Shelf ( A- Top Panel (Qty. 1) Qty. C- Bottom Panel (Qty. 1) D- Left Side Panel (Qty. 1) E- Right Side Panel (Qty.
- Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. V- Firebox Support (Qty. 1) Fireplace insert (Qty. 1) Remote control with battery (Qty. 1) (1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel 39+1 extra)
- Page 6 Assembly Instructions 1. Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Secure screw the Cam Bolts (2) into the designated small holes on the Fixed Shelf (B), Bottom Panel (C), Lower Partitions (F and G) by a Phillips screwdriver, as shown in the illustration.
- Page 7 Assembly Instructions 5. Align and attach the Base Rear Stretcher (O) to the Bottom Panel (C) by using three wood dowels (3) and four cam locks (1). 6. Align and attach the Middle Left Stringer (J) to the Left Lower Partition Panel (F) by using two Wood Dowels (3) and three Cam Locks (1).
- Page 8 Assembly Instructions 8. Insert four Wood Dowels (3) into the inner holes of the Lower Partition Panels (F and G) and attach them to the Fixed Shelf (B) by engaging four Cam Locks (1). 9. Insert four Wood Dowels (3) into the bottom holes of the Lower Partition Panels (F and G) and position the Bottom Panel (C) onto the inserted Wood Dowels (3).
- Page 9 Assembly Instructions 10. Securely screw the Cam Bolts (2) into the designated small holes on the Left and Right Side Panels (D and E) by a Phillips screwdriver. 11. Insert three Wood Dowels (3) into the inner holes on the Left Bottom Molding (M) and fasten it to the Left Side Panel (D) with six 1-1/2”...
- Page 10 Assembly Instructions 13. Insert ten Wood Dowels (3) into the large holes on Bottom Panel and Base Rear Stretcher (C and O) and Fixed Shelf (B) at both ends. 14. Align the large holes on the Left Side Panel (D) with the inserted Wood Dowels (3). Firmly press them together and fasten it in place by engaging five Cam Locks (1).
- Page 11 Assembly Instructions 17. Fasten the Base Front Stretcher (P) to the Side Panels (D and E) with four 1-1/2” Wood Screws (4). 18. Insert four Wood Dowels (3) into the inner holes on Base Front Molding (L) and attach it to the Base Front Stretcher (P) using eight 1-1/2”...
- Page 12 Assembly Instructions 19. Stand the assembled unit upright. 20. Fasten the Middle Crossbar Assembly (I) to the Middle Left and Right Stringers (J and K) by attaching two Metal Bracket s (11) at the joints, using two 5/8” Black Screws (7) per Bracket . 21.
- Page 13 Assembly Instructions 23. Insert one Wood Dowel (3) into the inner hole of the Partition Panel (H) and attach it to the Fixed Shelf (B) by using two Cam Locks (1). 24. Securely screw six Cam Bolts (2) into the designated small holes on Top Panel (A) by a Phillips screwdriver.
- Page 14 Assembly Instructions 25. Insert five Wood Dowels (3) into the top inner holes of the Upper Partition Panel (H) and Side Panels (D and E). Position the Top Panel (A) onto the inserted Wood Dowels (3) and fasten it in place with six Cam Locks (1).
- Page 15 Assembly Instructions 28. Insert four Shelf Supports (13) into the holes at your desired height inside each compartment. Tilt and rest the Adjustable Shelves (S) onto the Shelf Supports (13). Wood panel (Pre-attached) Glass panel Note: The doors are shipped with Wood Door Panel. You can keep the door as it is or interchange with Glass Door Panel (R) depending on your configuration.
- Page 16 Assembly Instructions 30. Extend the Door Hinges (17) and rest the hinge cups onto the cutouts of one Door Panel (Q). Secure the Door Hinges (17) in place by using two 5/8” Zinc Screws (9) in each. 31. Attach one Knob (14) to the front side of the Door with one Knob Bolt (15). 32.
- Page 17 Assembly Instructions 36. Plug the Cam Lock Covers (12) onto the visible cams locks to conceal the cams. 37. Stick the Rubber Bumpers (16) on the outer corners of Doors (Q) as shown. Electric Firebox 38. Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT drag the insert across the Bottom Panel (C) as it may scratch the unit.
- Page 18 Assembly Instructions Electric Firebox 39. Align and attach the Firebox Support (V) to the Bottom Panel (C) by inserting two 2” Self-tapping Screws (10) through the countersunk holes and screw into place. Wooden Stud Wall Short Screw Wall Floor Leveler Metal Bracket Long Screw Tools required (not provided): Phillips screwdriver, stud finder, power drill and 1/8”...
-
Page 19: Care And Maintenance
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ...