Download
Share
Print this page
Whalen WS184872BW-SB5MSC2 Manual
  1. Manuals
  2. Brands
  3. Whalen Manuals
  4. Indoor Furnishing
  5. WS184872BW-SB5MSC2
  6. Manual

Whalen WS184872BW-SB5MSC2 Manual

Step beam 5-shelf unit / black wrinkle w / melamine shelf, 2-pc workbench option
Hide thumbs

Advertisement

Quick Links

Download this manual
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL
PARTS, SHARP POINTS, SHARP EDGES
Video Instruction Guides
Go
tohttp://whalen.showuhow.com
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
Please call for replacement parts or assistance: 1-866-942-5362
Pacific Standard Time: 8:30 am – 4:30 pm PST Monday to Friday
Or visit our web
SHELF MAXIMUM CAPACITY:1000LBS/453.5KG.
ENTIRE UNIT MAXIMUM CAPACITY:5000LBS/2267.9KG.
CONCENTRATED LOAD CAPACITY 68.18KG/150LBS (PSF)
PER SQUARE FOOT.
to view step-by-step instructional
625073
sitewww.whalenstorage.com
Factory #11906
Page # 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the WS184872BW-SB5MSC2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Whalen WS184872BW-SB5MSC2

Summary of Contents for Whalen WS184872BW-SB5MSC2

  • Page 1 PER SQUARE FOOT. ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES Video Instruction Guides tohttp://whalen.showuhow.com to view step-by-step instructional videos for assembling and installing your product. Enter the following product number on the ShowUhow homepage.

  • Page 2: Parts List

    Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A-Angle Post (8-ea.) B- Long Double Rivet Beam (10-ea.) C-Short Double Rivet Beam (10-ea.) D-PB Shelf (5-ea.) E-Post Cap (16-ea.) F- Post Inserts (4-ea.) (Used on Storage Rack) G- Post Clip (2-ea.) (Used on Workbench)
  • Page 3 Failure to follow these guidelines can result in properly damage or personal injuries. Storage Rack is not recommended for outdoor use. 1. Do not exceed 1000lb./453.5kg per shelf. Do not exceed 5000lb./2267.9kg per unit. 2. Weight should be evenly distributed on the shelf surface. Weight that is concentrated in the center of the shelf will reduce the shelf capacity.
  • Page 4 To facilitate assembly we recommend having two persons assemble the unit.If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor or contact Whalen Storage at 1- 866-942-5362.We can assist you or give you directions.

  • Page 5: Assembly Instruction

    Assembly Instruction Start top end assembly by joining a Short Double Rivet Beam (part C) into the top keyholes of a 36” Angle Post (part A). Add the second 36” Angle Post. Hit the beam close to joints to lock pieces together. 5.
  • Page 6 Assembly Instructions Add two Long Double Rivet Beams (part B) to mid section. Be sure to use the bottom keyholes of the top assembly angle post and top keyholes of the bottom assembly. Follow the proper keyholes as shown in detail #5. Be sure to have all rivets in the keyholes before hitting the beam.
  • Page 7 Assembly Instruction Assemble the remaining Short and Long Double Rivet Beams to your desired location on the angle post. Hit Beams to lock pieces together. As shown in detail#7. Add the Post Caps (part E) to tops of the 4 corner Angle Posts. As shown in the detail #8.Lay the shelf decks into place.
  • Page 8 Assembly Instruction OPTION #2 2-PC WORKBENCH 1. Repeat step 2 through 3 to create bottom frame assembly. 2. Add two Short Double Rivet Beams (part A) and two Long Double Rivet Beams (part B) to the top keyholes of the Angle Posts. Hit the beams near the joints with a rubber mallet to lock pieces together, As shown in detail #1.
  • Page 9 Assembly Instruction 5. Complete the second unit by installing remaining Long Double Rivet Beams (part B). Make sure the Long Double Rivet Beams are flush with the Short Ones after installing. As shown in detail #3. Hit the beams near the joints with a rubber mallet to lock pieces together.

  • Page 10: Care And Maintenance

    Assembly Instruction 7. If desired place the two units end to end and attach posts with clip G as shown in Detail #5. In last instruction step. Care and Maintenance  Use a soft, clean cloth that will not scratch the surface when dusting. ...

  • Page 11: Limited Lifetime Warranty

    This Whalen Storage product (exclusive of shelves) is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, Whalen Storage will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled incorrectly, misused, abused by overloading, altered in any way or damaged due to accident.

This manual is also suitable for:

625073