Advertisement
On Windows 7 and 8, click Device Manager. On Windows XP, click the Hardware tab and then Device
5 )
Manager. In Device Manager, navigate to Ports (COM & LPT) (see Figure 2). A new COM device should
appear under Ports (COM & LPT) in Device Manager, as shown in Figure 2. Note the COMx port number of the
Prolific USB-to-Serial Comm Port, this information is needed to complete configuration of the SDK. Use that
port to send log from your LinkIt 2523 HDK.
To install the driver for debugging:
1) Download and install the Windows serial port driver from here.
2) Connect the LinkIt 2523 HDK to the computer using the micro-USB cable 1 and the micro-USB cable 2,
3) Open Windows Control Panel, click System and:
On Windows 7 and 8, click Device Manager.
On Windows XP, click the Hardware tab and then Device Manager.
4) In Device Manager, navigate to Ports (COM & LPT) (see Figure 3)
5) A new COM device should appear under Ports (COM & LPT) in Device Manager, as shown in Figure
Note the COMx port number of the mbed Serial Port, this information is needed to complete
configuration of the SDK. Use that port to send and receive data to and from your LinkIt 2523 HDK.
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
LinkIt 2523 HDK User's Manual
Figure 2. Device COM port for logging on your PC
Figure 3. Device COM port for debugging on your PC
© 2015 - 2016 MediaTek Inc.
4
Advertisement
