Advertisement
The LinkIt 2523 HDK supports two types of display topology: MIPI DSI and serial interface with a maximum resolution of
display of up to 320*320. The connectors CON6101 and CON6102 on the HDK are reserved for LCM. CON6101 supports
both MIPI DSI and serial interface. CON6102 supports the serial display interface only.
The HDK supports only one display at a time. The jumper selection for J6101 to J6106 for MIPI or serial interface
display connected to CON6101 can remain the same, or you can modify the jumper traces for serial display.
The connectors CON6101 or CON6102 support touch panel connected to the I2C interface. Please look up Table 12 pin
definition for more details on the connector.
Jumpers J6101 to J6106 are designed for high speed connector and serial pin header switching. Table 10 presents
jumper settings for different use case scenarios.
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
16
LinkIt 2523 HDK User's Manual
© 2015 - 2016 MediaTek Inc.
Advertisement
