Advertisement
source, as shown below. Connect the jumper J5002 pins to set the Bluetooth main
power source to VBT, as shown below.
Bluetooth power
input
Connect the jumper J5002 pins to set the Bluetooth main power source to VIO18, as
shown below.
Mount the R5005 and disconnect the jumper J5002 to set the Bluetooth main power
source to VIO28.
Bluetooth
Connect the jumper J5003 pins to select the antenna signal uplink and downlink paths
antenna
on an onboard antenna, as shown below.
path
Connect the jumper J5003 pins to select the antenna signal uplink and downlink path
using SMA connector, as shown below.
Bluetooth I/O
Connect the jumper J5004 pins to set the Bluetooth I/O power source to VBT, as shown
below. Connect the jumper J5004 pins to set the Bluetooth I/O power source to VIO18,
power input
as shown below.
Connect the jumper J5005 pins to set the Bluetooth I/O power source to
AVDD_BTRF_ext, as shown below. Connect the jumper J5005 pins to set the
Bluetooth I/O power source to VIO28, as shown below.
This document contains information that is proprietary to MediaTek Inc. ("MediaTek") and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
22
LinkIt 2523 HDK User's Manual
© 2015 - 2016 MediaTek Inc.
Advertisement
