Initial System Configuration - Opengear OM1200 User Manual

Initial System Configuration

This section provides step-by-step instructions for the initial configuration of your
OPERATIONS MANAGER.
By default, all interfaces are enabled. The unit can be managed via WebGUI or by
command line interface (CLI).
"Default Settings" on the next page
l
"Management Console Connection via CLI" on page 24
l
"Change the Root Password" on page 25
l
"Disable a Root User" on page 27
l
"Change Network Settings" on page 27
l
For Configure Serial Ports (see
l
INITIAL SYSTEM CONFIGURATION
"Serial Ports" on page 41)
21