Management Console Connection Via Cli - Opengear OM1200 User Manual

Management Console Connection via CLI

The Command Line Interface (CLI) is accessible using your preferred application to
establish an SSH session. Open a CLI terminal on your desktop, then:
1. Input the default IP Address of 192.168.0.1. SSH port 22 is enabled by
default.
2. When prompted, enter the log in and password in the CLI.
3. After a successful log in, you'll see a command line prompt.
Accessing the WebGUI CLI Terminal
An alternative CLI terminal is provided within the WebGUI. To access this terminal,
in the left-hand side Navigation Bar, navigate to the ACCESS > Local Terminal
page. You will be required to submit your log-in credentials.
INITIAL SYSTEM CONFIGURATION 24