Advertisement
BASIC CONFIGURATION
Serial Ports
CONFIGURE > Serial Ports
By default, all serial interfaces are enabled with the following settings:
•
Pin Out – X2
•
Baud Rate – 9600
•
Data Bits – 8
•
Parity – None
•
Stop Bits – 1
Local Console
In all Operations Manager OM1200 units, serial port 1 must be enabled as the local console
port. The port will need to be configured to be setup as a local console under CONFIGURE >
Serial Ports
Network
CONFIGURE > Network Connections > Network Interfaces.
2020-May
Advertisement
