Table of Contents
Advertisement
Set Logging Levels For Remote Syslog Server
Local Log Level limits the Syslog information being logged. Any log entry with a
value equal or greater than the level specified in the config is sent to the remote
server.
Ensure Port Logging is Set to the Required Level
1. Navigate to the Serial Ports page and enable port logs through the serial port (Con-
figure > Serial Ports)
2. For the serial port number you have selected, click the Edit Serial Ports button in the
Actions column.
3. Navigate to Logging Settings and select the required logging level.
4. Click the Apply button. The change will be applied within a few seconds.
Set Global Serial Port Settings
Navigate to: Configure > Services > Syslog > Global Serial Port Settings
1. In the Global Serial Ports tab
i. Select the required Facility.
ii. Select the required Severity.
Note: See the tables below for definitions of Facility and Severity .
2. Click the Update button and wait for the update confirmation banner:
The Syslog will log only those entries of the nominated event type.
Edit or Delete an Existing Syslog Server
Configure > Services > Syslog > Edit Syslog Server
CONFIGURE MENU
131
Advertisement
Table of Contents
