Power Connection - Opengear OM1200 User Manual

Power Connection

OM2200 and some newer OM1200 have dual power inlets with auto failover built
in. These power supplies each accept AC input voltage between 100 and 240 VAC
with a frequency of 50 or 60 Hz. The OM2224-24E-10G-L draws a maximum of
48W, while non-24E are less than 30W.
Two IEC AC power sockets are located on the power side of the metal case, and
these IEC power inlets use conventional IEC AC power cords.
Note: Country specific IEC power cords are not included with OM2200s.
OM1200s are shipped with a 12VDC to universal AC (multi-country clips) wall
adapter.
See also "Dual AC Supply" on page 13
Operations Manager Platform (OM1200) Environmental And Power
Power Draw
Operating conditions
Cooling
Environmental Sensors
Power Draw Sensors
INSTALLATION AND CONNECTION
and "SNMP Alerts Power" on
< 25 Watts
Temperature 0~50C, Rel Humidity 5~90%
Passive
Smart Controller with multi-zone temperature
sensors.
Auto-shutdown/re-boot on severe thermal events
Active multi-zone power draw monitoring
page 58.
11