First, see if checking the list on page 31 solves the problem.
Make sure your printer is selected in Chooser:
a From the Apple menu, choose Chooser.
b In the left window, highlight the Lexmark Z65 printer icon. If your printer is not listed,
install the printer software (see page 43).
c In the Connect to: box, highlight the Lexmark Z65 printer icon. If your printer is not
listed, check your printer cable connection. If your printer is connected to a network,
check your network cable connections.
d Click the box at the top left to close Chooser.
e When the Page Setup message dialog box appears, click OK.
f Send your document to print.
If your document did not print, check your printer status:
a From your desktop, highlight the Lexmark Z65 printer icon.
b From the menu bar, choose Printing.
c Make sure Set Default Printer is selected.
d Choose Start Print Queue, if available.
e Send your document to print.
If your document did not print, print a test page:
a From the Apple menu, choose Control Panels
b Click Print Test Page.
– If the test page prints, your printer is working properly. Check your software
application documentation for troubleshooting information.
– If the test page does not print, refer to the printer software Help (see page 4).
My document did not print.
(Mac OS 8.6 to 9.2)
39
Lexmark Z65 Control Panel.