Lexmark Z65n User Manual page 23

2
From the Configure Network Printer screen, enter the IP address you
want to assign to your printer, and then click OK.
3
From the Printer Selection screen, select the next unconfigured printer
from the list. Repeat step 1 and step 2 until all the printers in the list
are configured.
4
From the list on the Printer Selection screen, select the printer you
want to print to.
5
Click Select to continue the printer software installation.
6
Follow the steps for your operating system:
Mac OS 8.6 to
9.2
When the
printer software
prompts you,
follow the
directions on
the screen to
install and align
the cartridges.
7
From the Printer Setup is Complete screen, click Test Page to print a
test page on the network printer.
8
Click Finished to complete the printer software installation.
Mac OS X version 10.0.3 to 10.1
1 From the Printer Selection screen, click Open Print Center.
The Printer List appears.
2 If your printer is listed, continue with step 3.
If your printer is not listed, click Add Printer, and then select
Lexmark Inkjet Networking from the pop-up menu. Select your
printer from the list, and then click Add.
3 Click the red close button.
4 From the Printer Selection screen, click Continue.
5 Follow the directions on the screen to install and align the
cartridges.
19