Mechanical Installation - Electrolux DC6-4 Installation Manual

Installation manual
10

4.4 Mechanical installation

The drying cabinet must be secured to the wall to prevent it from tipping over. (Kit for this included upon delivery.)
Once the drying cabinet is in its final position, open the door and slide out the upper hanger section.
Drill 8 mm holes in the wall through the two predrilled holes in the rear of the drying cabinet (F).
Insert the plastic plugs (C) into the holes in the wall (D). Place a spacer (E) on the screw (G) and install with a washer
as shown in the figure.
fig.W01509