Electrolux DC6-4 Installation Manual page 18

Installation manual
18
Attach the door.
Insert the door cable through the slot in the new upper hinge. (Use the bared part of the cable).
Slide the door up onto the hinge pin.
Attach the lower hinge pin.
Connect the door cable to the fan unit in the upper part of the drying cabinet using the fast coupling.
Make sure the cables are connected in the same way as before.
Reinstall protective cover over the cable and refit the cap over the drying cabinet.
Move the door handle to the other side. Torque tighten to 2.5 Nm.