Re-Locking a Protected File or Device
Use the LDELETEPASSWORD command to re-lock a password-protected file or
device that has been unlocked using the LDECLARE command.
If an LRESOURCE is not specified, all unlocked files or devices are re-locked.
Syntax:
@PJL LDELETEPASSWORD [LRESOURCE : "device:filename.filetype"][<CR>]<LF>
LRESOURCE : "device:filename.filetype"
Values for "
device:filename.filetype
device
flash
flash1
,
filename
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
filetype
An identifier that categorizes the file, such as
macros or
beginning on page 3-87 for a complete list of the supported
filetypes. The
3-96
" are:
disk
disk1
,
, or
(case insensitive)
p5symset
for PCL symbol sets. See the table
filetype
is case sensitive.
PJL
filename
is case
p5macro
for PCL