Re-Locking A Protected File Or Device - Lexmark C520 Technical Reference

Re-Locking a Protected File or Device

Use the LDELETEPASSWORD command to re-lock a password-protected file or
device that has been unlocked using the LDECLARE command.
If an LRESOURCE is not specified, all unlocked files or devices are re-locked.
Syntax:
@PJL LDELETEPASSWORD [LRESOURCE : "device:filename.filetype"][<CR>]<LF>
LRESOURCE : "device:filename.filetype"
Values for "
device
filename
filetype
device:filename.filetype
, ,
flash flash1
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID for a
PCL font, or the actual file name for data, Type 1 fonts, and
demo files as shown on the Directory. The
sensitive.
An identifier that categorizes the file, such as
macros or
p5symset
beginning on page 3-87 for a complete list of the supported
filetypes. The
filetype
3-96
" are:
, or (case insensitive)
disk disk1
for PCL symbol sets. See the table
is case sensitive.
PJL
is case
filename
for PCL
p5macro