Default Command - Lexmark T642 Technical Reference

DEFAULT Command

This command modifies the default setting for the specified environment variable and
stores the setting in the printer NVRAM. The new setting is activated with the
occurrence of the next PJL reset condition.
Syntax:
@PJL DEFAULT [command modifier:value] variable=value[<CR>]<LF>
[command modifier:value]
[command modifier:value]
The
to be modified. The variables supported are listed in the tables beginning on
page 3-12.
•
[command modifier:value]
A
the tables "Common Variables for Both Printer Languages" on page 3-12,
and "Printer Unique Variables for Both Printer Languages" on page 3-19.
•
LPARM:PCL
is used with variables specific to PCL emulation. (See the tables
"Common Variables for PCL Emulation" on page 3-48, and "Printer Unique
Variables for PCL Emulation" on page 3-49.)
•
LPARM:POSTSCRIPT
the tables "Common Variables for PostScript Emulation" on page 3-51, and
"Printer Unique Variables for PostScript Emulation" on page 3-52.)
•
LRESOURCE:
"
variables. (See the table "Printer Unique LRESOURCE Variables" on
page 3-53.)
Values for "
device
filename
filetype
parameter specifies the type of PJL variables
parameter is not required for variables listed in
is used for variables specific to PostScript emulation. (See
device:filename.filetype
device:filename.filetype
flash flash1 disk
, ,
A unique identifier for a file, such as the macro ID for a PCL
macro, the symbol set ID for a PCL symbol set, the font ID
for a PCL font, and so on. The
An identifier that categorizes the file, such as
p5symset
PCL macros or
"Table 3-22: Variables for Flash and Disk File and
Password Commands" on page 3-87 for a complete list of
the supported file types. The
3-8
" is required for LRESOURCE
" are:
disk1
, or (case insensitive)
filename
is case sensitive.
for PCL symbol sets. See
filetype
is case sensitive.
PJL
p5macro
for