Connecting using an Ethernet network
Wired setup and connection
1
Insert the Software and Documentation CD.
2
Click Install.
3
Click Agree.
4
Click Suggested.
5
Click Wired Network Attach.
6
Connect the Ethernet cable to the printer and to an active Ethernet port on the network.
Make sure the computer you are using to configure the printer is attached to a working network port on the same
network as the printer.
7
Connect the power cord to the printer and plug it into the wall. Turn on the printer.
8
Follow the on screen instructions to complete the wired configuration.
Note: For information on telephone and fax setup, refer to the User's Guide on the Software and Documentation CD.
Connecting using an Ethernet network
29