Table of Contents
Advertisement
Quick Links
*P518-027*
P518-027
Model LE
Greenwich (GRW)
Table of Contents
Prepare for Installation
Greenwich Trim Installation
Addison Trim Installation
User Guide
Customer Service
1-877-671-7011
LE-Lock - PILOT ONLY
Sectional Trim
www.allegion.com/us
Escutcheon Trim
Installation Preparation
2
Tools Needed
• Phillips screwdriver
3
• Lever installation tool
6
• Pliers
9
Optional
• Needle-nose pliers
• Drill with 3/8" drill bit
• T10 and T25 Torx drivers
IMPORTANT NOTES
Install and test lock with door open to avoid being locked out.
ENGAGE™ WEB & MOBILE APPLICATIONS
Search for "Allegion ENGAGE" in the Apple App Store or Google
Play store to download the app.
Navigate to portal.allegionengage.com to access your account
online
Installation Instructions and User Guide
Addison (ADD)
Door preparation:
Contact Product Support at
1-877-671-7011.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Allegion Schlage LE
Summary of Contents for Allegion Schlage LE
- Page 1 Install and test lock with door open to avoid being locked out. ENGAGE™ WEB & MOBILE APPLICATIONS Search for “Allegion ENGAGE” in the Apple App Store or Google Play store to download the app. Navigate to portal.allegionengage.com to access your account...
-
Page 2: Install Strike
Adjust door handing. Install strike. FOR DEADBOLT ONLY: Strike box will not have a DPS magnet. RX (request to exit) utilizes a microswitch inside the lock case to detect rotation of the inside knob/lever. The switch then signals the use of the DPS strike box opening to the security system. - Page 3 Installation Instructions for Sectional Trim Install spring cage into lever. Use pliers carefully to install mounting posts to avoid damage. Continue for installation instructions for your lock with Arrow in direction of Greenwich (sectional) trim. lever down rotation For Addison (escutcheon) trim instructions go to page 6.
- Page 4 Partly install the key cylinder. Connect the cables to the inside assembly Turn key cylinder six (6) full turns into the chassis. Insert key in cylinder There are two cables that need to be connected. to aid with turning, but pull key out one notch. FOR DEADBOLT ONLY: Align driver bar into the chassis.
- Page 5 Fully tighten the key cylinder and chassis screws. Connect the battery cable. The cylinder face needs to be flush to the outside escutcheon. Tighten Install four (4) AA batteries into the battery holder. Tuck the cable behind the cylinder mounting screw. the tab in the escutcheon Cylinder Tuck cable...
- Page 6 Installation Instructions for Escutcheon Trim Install mounting posts and spring cage. Arrow on the spring cage points in direction of lever down rotation. Use pliers to carefully install mounting posts to avoid damage. Continue for installation instructions for your lock with Addison (escutcheon) trim.
- Page 7 Install spindle, spring cage, and mounting plate. Install the inside assembly. Arrow on the spring cage point in direction of lever down rotation. Connect the cables to the inside assembly There are two cables that need to be connected. For deadbolt only: align driver bar into the chassis. Thumbturn must be vertical.
- Page 8 12a Optional: Install security screw and washer. Install the armor plate. Remove standard screw and washer and replace with security screw and washer. Install the inside lever. Connect the battery cable. Install four (4) AA batteries into the battery holder. Tuck the cable behind the tab in the escutcheon Tuck cable behind tab.
-
Page 9: Lock Testing
Download the ENGAGE mobile application Standalone/Construction Access Mode requires an electronic credential. Search for “Allegion ENGAGE” on the App Store (iOS) or Google Play • Enabled by default and after a Factory Default Reset (FDR). Store (Android) to download the free ENGAGE mobile application. - Page 10 3. Select the “+” icon in the upper right corner. 7. When the Credentials detail screen displays, present the credential to the reader. (You will have 10 seconds to present the credential). 4. Follow the lock commissioning wizard to complete initial setup of The mobile app will show that the credential was received, and it the lock.
- Page 11 Safe Mode View lock audit information Audit information for each lock can be viewed from anywhere with the CAUTION ENGAGE mobile app. Audit information is stored and viewed from the ENGAGE cloud Enter Safe Mode only as a last resort! Entering Safe Mode database.
-
Page 12: Fcc Statement
• Wireless communications, Wi-Fi, Bluetooth, Door Position, and Request to Exit switch features are not part of UL Listed product. • Tested to compliance with UL 294 5th Edition Class I. Customer Service 1-877-671-7011 www.allegion.com/us © Allegion 2016 Printed in U.S.A. P518-027 Rev. 08/16-a... - Page 13 Number Revision 3. tolerance ± .13 08-24-2016 4. printed in country may vary P518-027 5. drawings not to scale Created By 6. 12 page saddle-stitched booklet Activity R. Byun 3899 Hancock Expwy Software: InDesign Security, CO 80911 © Allegion 2016...
Need help?
Do you have a question about the Schlage LE and is the answer not in the manual?
Questions and answers