Using Xmodem To Upgrade The Bootware Through The Console Port - H3C WA6300-CMW710-R2444P01 Release Notes

<Sysname> display version
H3C Comware Software, Version 7.1.064, Release 2444P01
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd. All rights reserved.
H3C WA6322 uptime is 0 weeks, 0 days, 0 hours, 1 minute
Last reboot reason : User soft reboot
Boot image: flash:/wa6300-boot.bin
Boot image version: 7.1.064, Release 2444P01
Compiled Jun 04 2021 16:00:00
System image: flash:/wa6300-system.bin
System image version: 7.1.064, Release 2444P01
Compiled Jun 04 2021 16:00:00
with 1 ARM 1000MHz Processor
1024M bytes DDR4
128M bytes NandFlash Memory
Hardware Version is Ver.B
Basic Bootrom Version is 7.08
Extend Bootrom Version is 7.15
[Subslot 0]H3C WA6322 Hardware Version is Ver.B
[SLOT 1]GE1/0/1
[SLOT 1]GE1/0/2
[SLOT 1]GE1/0/3
[SLOT 1]RADIO1/0/1
[SLOT 1]RADIO1/0/2
Using Xmodem to upgrade the BootWare through
the console port
Command output information varies by device model.
To use Xmodem to upgrade the BootWare through the console port:
53. Power on the device.
54. Press Ctrl+D immediately after the "Press Ctrl+D to access BASIC-BOOTWARE MENU"
message appears.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
=====================<BASIC-BOOTWARE MENU (Ver 0.06) >======================
|<1> Modify Serial Interface Parameter
|<2> Update Extended BootWare
|<3> Update Full BootWare
|<4> Boot Extended BootWare
|<5> Boot Backup Extended BootWare
|<0> Reboot
(Hardware)Ver.B, (Driver)1.0
(Hardware)Ver.B, (Driver)1.0
(Hardware)Ver.B, (Driver)1.0
(Hardware)Ver.B, (Driver)1.0
(Hardware)Ver.B, (Driver)1.0
25
|
|
|
|
|
|