MSI MS-6132 Instruction Manual page 90

CHAPTER 4

Description of the item on screen follows:

1st Boot Device/2nd Boot Device/3rd Boot Device

This option sets the sequence of boot drives.

The settings are:

IDE0

IDE1

IDE2

IDE3

Floppy LS-120 The system will boot from LS-120(120M Floppy).

ATAPI.ZIP

SCSI

Network

CD-ROM

Disable

Try other Boot Devices

This option sets the device boot, if all the Four Boot Devices failed.

Floppy Access Control

This option sets the Floppy to Read-only or Read-Write.

HDD Access Control

This option sets the HDD to Read-only or Read-Write. During Read-

only, if you try to write on the HDD, the system will halt.

S.M.A.R.T for Hard Disks

This option allows you to enabled or disabled the S.M.A.R.T feature

of the Hard Disk.

The system will boot from the first HDD.

The system will boot from the Second HDD.

The system will boot from the Third HDD.

The system will boot from the Fourth HDD.

The system will boot from the SCSI.

The system will boot from the Network drive.

The system will boot from the CD-ROM.

Disable this sequence.

4-6

AMI

BIOS USER'S GUIDE

AMI

BIOS USER'S GUIDE