Advertisement
The JWOL connector is for use with LAN add-on cards that supports Wake
Up on LAN function. To use this function, you need to set the "Resume By
Ring" to enable at the BIOS Power Management Setup.
Note: LAN wake-up signal is active "high".
Note:
To be able to use this function, you need a power supply that
provide enough power for this feature.
(750 ma power supply with 5V Stand-by)
PIN
1
2
3
2-40
SIGNAL
5VSB
GND
MP_WAKEUP
1
3
JWOL
Advertisement
