MSI MS-6132 Instruction Manual page 25

2.3-2 Memory Installation Procedures
A. How to install a DIMM Module
1. The DIMM slot has a two Notch Key "VOLT and DRAM", so the
DIMM memory module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM slot.
Then push it in.
3. Close the plastic clip at the side of the DIMM slot.
Note: You can only use a 3.3 volt DIMM module (EDO or SDRAM).
Single Sided DIMM
Double Sided DIMM
DRAM VOLT
2-21