MSI MS-6132 Instruction Manual page 62

CHAPTER 3

Auto Configuration

Choosing Enabled (default) will automatically configure chipset

features using default settings. Choose Disable to customize setup.

DRAM Speed Selection

The DRAM timing is controlled by the DRAM Timing Registers.

The timings programmed into this register are dependent on the system

design. Slower rates may be required in certain system designs to support

loose layouts or slower memory.

60ns

50ns

MA Wait State

This item allows you to select MA Wait State. The settings are Fast

or Slow.

EDO RAS# To CAS# Delay

This sets the relative delay between the row and column address

strobes from DRAM (EDO). The settings are 2 or 3.

EDO RAS# Precharge Time

Defines the length of time for Row Address Strobe from DRAM

(EDO) is allowed to precharge. The settings are 3 or 4.

EDO DRAM Read Burst

This sets the timing for burst mode reads from DRAM(EDO). Burst

Read and write requests are generated by the CPU in four separate parts.

The lower the timing numbers, the faster the system will address memory.

x222

x333

DRAM Timing Type.

Read DRAM (EDO) timings are 2-2-2

Read DRAM (EDO) timings are 3-3-3

AWARD

3-14

BIOS SETUP