Submitting Selection; Short Paper - Lexmark C530 series, C532 series, C534 series Menus And Messages Manual

Submitting Selection

Wait for the message to clear.
Tray <x> Empty
Load paper in the tray to clear the message.
Tray <x> Low
Load paper in the specified tray to clear the message.
Tray <x> Missing
Insert the specified tray into the printer.
USB/USB <x>
The printer is using a USB cable connection. The USB port is the active communication link.
Waiting
The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional
data.
•
Press to print the contents of the buffer.
•
Cancel the current print job.
1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com.
31.72 Missing or Defective <color> Cartridge
The specified toner cartridge is either missing or not functioning properly.
•
Remove the specified toner cartridge, and then reinstall it.
•
Remove the specified toner cartridge, and then install a new one.
32 Replace unsupported <color> cartridge
Remove the specified toner cartridge, and then install a supported one.
34 Incorrect media
•
Load the appropriate paper or other specialty media in the tray.
•
Press until Continue appears, then press
tray.

34 Short Paper

•
Load the appropriate paper or other specialty media in the proper tray.
•
Press until Continue appears, then press
tray.
•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
Check the Print Properties settings to make sure the print job is requesting the correct paper size and type.
to clear the message and print the job using a different paper
to clear the message and print the job using a different paper
48