Osd Configuration; Video Mask - Vitek Transcendent VTD-TND4RFA3/-2 Manual

Network Camera User Manual

4.2.3 OSD Configuration

Go to Image→OSD interface as shown below.
Set time stamp, device name, OSD content and picture overlay here. After enabling the
corresponding display and entering the content, drag them to change their position. Then click
the "Save" button to save the settings.
Picture Overlay Settings:
Check "OSD Content1", choose "Picture Overlay" and click "Browse" to select the overlay
picture. Then click "Upload" to upload the overlay picture. The pixel of the image shall not
exceed 200*200, or it cannot be uploaded.

4.2.4 Video Mask

Go to Image→Video Mask interface as shown below. A maximum of 4 zones can be set up.
19