Table of Contents
Advertisement
16
Appendix A: Headset overview
16.1 Description
Part
1
Noise cancellation toggle
Green: Noise cancellation is on.
2
Power button
Indicator （See section
3
4
Micro USB charging port
5
Charging indicator:
- Flashing red: low battery
- Solid red: charging. Turned off when fully charged.
6
3.5 mm connector
16.2 Headset operations
Function
Operation
Power on
Press and hold the power button for 3 seconds.
Power off
Press and hold the power button for 3 seconds.
16.3 Working as a wireless headset
The headset is paired with OS 531 device before delivery.
1. Press and hold the power button for 3 seconds to power on the headset.
2. Enable the wireless headset function in the OS 531 by below steps:
A. Navigate to Menu > Device Setting > Pairing Headset.
B. Switch on the Wireless Headset toggle.
After successfully connected, the message "EDIFIER W860NB connected" appears on the OS 531 screen.
Note: For the purpose of automatic wireless connection, please do not press and hold the power button in the
headset for more than 3 seconds. A press 5 seconds will bring the headset into the pairing mode. In this mode the
headset cannot connect to the OS 531 automatically.
16.4 Working as a wired headset
When the headset runs out of battery, use the audio cable provided in the delivery package to connect the headset
to the OS 531.
Description
16.2
for details)
Indicator
Blue light constantly lit for 1 second
Red light constantly lit for 1 second
31
Advertisement
Table of Contents
