Managing Leak Records; Viewing And Editing A Leak Record - Omega OS 531 Installation And Operating Manual

14. In the Confirmation pop-up that appears, click the OK button to save the record and exit.
15. Fill out the paper leak tag, and then tie it near the leak point.
Note: To view details in a leak record, click the Leaks button on the home screen. See Chapter
ATTENTION!
Remember to turn off the wireless headset, otherwise it will remain on until running out of
power.
12

Managing leak records

After a leak is recorded in the OS 531, you can review the leak record, and if needed delete the leak and record again.
The leak records provide input for leak repair and analysis:
If the OS 531 is in the non-LMS mode, you can download the leak records to a PC for further leak analysis.
•
For more information, see .
If the OS 531 is in the LMS mode, upload the leak records to the LMS. For more information, see .
•
The LMS will generate various reports based on your needs and guide LMS officers through producing the
leak repair or replacement forms.

12.1 Viewing and editing a leak record

You can view a leak record in the OS 531, and edit the leak details if needed. If you are not satisfied with the leakage
data, you can delete the leak record and record again.
Steps:
24
13 for details.