Switching The Os 531 To The Required Mode; Non-Lms Mode Only) Creating A Survey; Lms Mode Only) Downloading A Survey From The Lms; Remotely Logging Into The Lms Via Wlan - Omega OS 531 Installation And Operating Manual

9.1 Switching the OS 531 to the required mode

ATTENTION!
Before switching the mode, please perform or . Otherwise, the records detected in the
previous mode will be lost!

9.2 (Non-LMS mode only) Creating a survey

When the OS 531 in the non-LMS mode, to conduct a leak survey for a site, you must first create the survey in the OS
531.
Steps:

9.3 (LMS mode only) Downloading a survey from the LMS

As a technician, before you start to detect, download the survey information from the LMS.
Note: An OS 531 in the LMS mode allows only users in the technician role to log in for leak detections. For more
information about the user roles and their responsibilities in the LMS + OS 531 application, see section
Steps:
1.
2.

9.3.1 Remotely logging into the LMS via WLAN

First connect the OS 531 to the WLAN network through Wi-Fi, and then log into the LMS through the WLAN for user
16
1. Access Menu > Device Settings > Enable LMS Mode.
2. To enable the LMS mode, switch on the Enable LMS Mode
toggle. To the non-LMS mode, switch off this toggle.
1. Access Menu > Survey Start.
2. Enter the survey ID and site name.
3. Click Create.
4. In the Confirmation pop-up window that appears, check the
input information, and if correct, click Yes.
Note: Before you have completed checking and specifying the
survey settings, do not start the survey by clicking Start. The
reason is once you start the survey, the currency unit cannot be
changed.
9.2 .