Transportation, Packaging, Storage; Accompanying Documents - HBS ONURFIX A 12 Operating Manual

1.5

Transportation, Packaging, Storage

HBS delivers products in a specific transport package.
Save the undamaged packing. Ship and transport the device only in its original
packing.
Right before delivery, the welding gun is once again checked for proper functioning and
a control mark is attached. When receiving the delivery, check everything for damages
and completeness. If damages occurred during transportation or components are
missing, inform the manufacturer or the haulier immediately (see page ii).
Proper functioning of the welding gun can only be checked before starting-up by visual
inspection (visible damage).
The following items are to be observed if the welding gun is not to be put into operation
immediately after delivery.
– The welding gun must be stored in a secure place
– The welding gun must be protected against humidity, dust, metallic dirt.
– Storage temperature: -5 °C to +50 °C
– Relative humidity:
If you resell the welding gun, please provide us with the name and postal address
of the new owner so that we can advise them of any changes to the operating
manual.
1.6

Accompanying Documents

In addition to this operating manual, you must also observe the operating manual of the
power unit to which the welding gun is to be connected as well as applicable accident
prevention and safety instructions.
A 12 Order No. BA 93-20-270 Issue 01.03.08
0% to 50% at +40 °C
0% to 90% at +20 °C
11